Mge-ups-systems S3 Manuel d'utilisateur télécharger pdf (Page 31)

Figure : Outline and Mounting for 2kVA

2- 1B

The side mounting brackets can be positioned for either a 19

inch, 23 inch, or 25 inch rack. The Inverter can also be

mounted either ﬂush with the front panel or at the chassis

midpoint. Prior to mounting the Inverter in the rack,

determine the position of all input and output wiring.

NOTE

Input and output conductors must be sized for the maximum current

as shown in Table 2-1 and otherwise be in compliance with applica-

ble electrical codes. Be sure all connections are fully tightened.

D.C. input terminals can accommodate wire size up to one "0" gauge

wire.

2.5.2 Mounting And

Wiring Access

86-153061-00 2 — 3Installation and Operation

Owner’s Manual

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Pas de commentaire

Mge-ups-systems S3 Manuel d'utilisateur Page 31